Hose Reel Pump Controller
"Unity" Fire Pump controller is manufactured in accordance to be standard and local requirements.
The fire pump controller can be operated in automatic coindence detection (pressure switch) or manual using manual push button.
 
Hose Reel Pump Controller
The panel come in various of range from 2 HP to 7.5 HP using 415 V 3 Phase, 50 HZ. There is two types of electrical starter available for this controller, either star-delta starter or direct on line starter depending on the horsepower use. The standard panel is built for wall mounted type and indoor use only. For special requirement, the panel can also be available above 7.5 HP or in weatherproof type(outdoor). The panel can control either 2 electrical pump or 1 electrical pump and 1 diesel engine pump.
 
Construction
Standard 1.5 mm thick mild steel plate, coated with "signal red" epoxy paint, fully compartment for individual pump control.
 
Standard Features and Indications
Phase light indicator
Pump run and trip indicator
Pump on manual and auto indicator
A/C failure indicator
Manual start and stop push button
Incoming isolator or MCCB for power supply
Individual MCB/ MCCB for each pump
Individual MCB for each pump controller
Auto/ Off/ Manual selector switch for each pump
Starter solenoid on and fail to start indicator for diesel engine controller
Voltmeter and ammeter for diesel engine controller
Automatic battery charger for diesel engine
Automatic cranking system and fail status for diesel engine
Fuse protection for AC and DC output for diesel engine controller
Pump run and trip status to fire alarm system.
 
Certified and Approved by: Jabatan Bekalan Electrik Dan Gas TKL (PS) 79/98
 
Hose Reel Pump Controller For 1 Elec. & 1 Diesel Pump
Hose Reel Pump Controller For 2 Electrical Pump
Direct On Line Controller
     
Star-Delta Controller
 
Copyright @ 2004 Unity Switchboard Sdn Bhd